Ave. Nexxus #124, Parque Industrial Nexxus, General Escobedo, Nuevo León, México
+52 81 2525 3200
hola@foamcell.com
Closed Cell
Our Backer Rod is composed of a flexible, 100% closed-cell polyethylene joint filler.
Highly Resistant
Its closed-cell composition makes our Backer Rod highly resistant to water and moisture.
Compatible
It's compatible with the majority of traditional sealants such as silicone, urethane, acrylic, butyl rubber, latex, and crack fillers. Additionally, it's a non-adhesive product and won't stick to the sealants.
Recommendations
It's important to ensure that the concrete joints to be filled are dry and free of any loose material. Choosing the appropriate size of Backer Rod for the joint width is key. We recommend using a non-sharp tool to compress the filler to the depth recommended by the sealant manufacturer for best results.
Our Backer Rod should be installed in concrete joints or gaps prior to the application of sealant. Doing this avoids the excessive use of sealant.
Yes, it is composed of closed-cell polyethylene foam, which prevents it from absorbing moisture and makes it a waterproof product.
It's important to note that the size of Backer Rod is not the same as the size of the joint. The Backer Rod's size is always larger than the joint. Please refer to the table at the bottom of the specification sheet to accurately determine which size of Backer Rod to use.
Yes. In addition to being a chemically inert and solvent-resistant product, it is compatible with butyl, polysulfide, polyurethane silicone, and acrylic sealants.